BlueTooth module

How to set up a BlueTooth module

Connect The BluetoothModule to the FTDI porgrammer
TX  to RX  between the modules

I use Arduino Serial monitor and set up COM port number and ex. 4800 BAUD

Check if module responds
Print AT and press send.Response is OK

Change BaudRate on module

Print AT+BAUD8 and press send.Response is OK115200

1----1200

2----2400

3----4800

4----9600
5----19200

6----38400

7----57600

8----115200

Change portspeed to 115200

Change Name on module

Print AT+NAMEQUAD and press send.Response is OKsetname

Change PinCode on module

Print AT+PINxxxx and press send.Response is OKsetpin

/Patrik